New generation light ergonomic brushcutter with STIHL ErgoStart for easy jerk free starting. Ideal for tackling grassy areas around the garden or at the allotment. Modern appearance, convenient operation and very simple starting procedure are the highlights of the new generation STIHL grass trimmer range. The number of steps needed to start the machine has been drastically reduced. The frustration of a flooded engine is virtually eliminated. New 2-stroke engine with stratified charge allows fast acceleration, low emissions, reduced fuel consumption. With bent shaft, loop handle and AutoCut mowing head ideally for trimming small areas of grass and around obstacles. Ideal for edging as well as for small areas of grass. The loop handle can easily be adjusted for comfortable operation without the use of tools. Also available without STIHL ErgoStart easy-start system (FS 50).
|Power output kW/bhp||0.8/1.1|
|Weight kg 1)||4.5|
|Cutting blade||AutoCut Mowing head|
|Fuel capacity l||0.34|
|Vibration levels left/right m/s² 2)||6.0/5.7|
|Overall length m 3)||1.45|
|Sound pressure level dB(A) 4)||93.0|
|Sound power level dB(A) 4)||105.0|
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.
The loop handled grass trimmers and brushcutters are ideal for working in areas where space is limited, e.g. thinning between bushes and shrubs.
STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
Easy, comfortable thumb-operated control means the operator's hand never leaves the handle.
- Orders received on a working day (Mon-Fri) are delivered within 1-5 working days
- Orders received on Friday will be delivered on Monday if in stock.
- Saturday deliveries are available by phone order - 0151 345 9971
Click for more information on Delivery and Returns.